NC23- 600cc Project start up!
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Site Supporter
- Reactions:
- Posts: 2807
- Joined: Wed Apr 30, 2008 4:47 pm
- Bike owned: CCM404 SM, CBR4/6 in progress
- Location: Nottingham U.K
NC23- 600cc Project start up!
my next project is going to be a NC23/600
Does anyone know which year 600 engine I need that bolts into the 400 frame ( yes I know the frame spars need welding)
Does anyone know which year 600 engine I need that bolts into the 400 frame ( yes I know the frame spars need welding)
-
- Site Supporter
- Reactions:
- Posts: 2807
- Joined: Wed Apr 30, 2008 4:47 pm
- Bike owned: CCM404 SM, CBR4/6 in progress
- Location: Nottingham U.K
Re: NC23- 600cc What engine?
well apparently it the F1 and F2 engine.
So other than the following what do you think I will from the donor 600?
Loom and all ancilleries
Clocks
Engine
carbs
Airbox
Exhaust?
So other than the following what do you think I will from the donor 600?
Loom and all ancilleries
Clocks
Engine
carbs
Airbox
Exhaust?
- CMSMJ1
- Moderators
- Reactions:
- Posts: 9806
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: NC23- 600cc Project start up!
does an 893 blade not go in with a similar amount of hassle?
thinking aloud...
Hybrids are cool
thinking aloud...
Hybrids are cool
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
- Davez29
- Site Supporter
- Reactions:
- Posts: 1931
- Joined: Sun Aug 03, 2008 8:38 pm
- Bike owned: NC29 forever
Re: NC23- 600cc Project start up!
A short while back there was a member (Shane) gave an account of his 4/900 in the forum, its gone now but luckily he gave me permission to copy his post. Find it on my site here. https://sites.google.com/site/cbr400rrr ... oject-4-90CMSMJ1 wrote:does an 893 blade not go in with a similar amount of hassle?
thinking aloud...
Hybrids are cool
It might give an insight.
dave
-
- Site Supporter
- Reactions:
- Posts: 2807
- Joined: Wed Apr 30, 2008 4:47 pm
- Bike owned: CCM404 SM, CBR4/6 in progress
- Location: Nottingham U.K
Re: NC23- 600cc Project start up!
nice one I'll have a look
- Davez29
- Site Supporter
- Reactions:
- Posts: 1931
- Joined: Sun Aug 03, 2008 8:38 pm
- Bike owned: NC29 forever
Re: NC23- 600cc Project start up!
opps I just remembered its 23 your after. I do think i have a mag that mentions a 900/nc23 conversion I will look it up.
-
- Site Supporter
- Reactions:
- Posts: 2807
- Joined: Wed Apr 30, 2008 4:47 pm
- Bike owned: CCM404 SM, CBR4/6 in progress
- Location: Nottingham U.K
Re: NC23- 600cc Project start up!
thats its a 600 lump I'm wanting to put in though.
Shame that thread you linked doesnt give much info around what cutting was needed.
Shame that thread you linked doesnt give much info around what cutting was needed.
- Davez29
- Site Supporter
- Reactions:
- Posts: 1931
- Joined: Sun Aug 03, 2008 8:38 pm
- Bike owned: NC29 forever
Re: NC23- 600cc Project start up!
Yes I know, I suppose he never thought about it at the time. Anyhow I have found the article but it is a 900 engine in a 23, a couple of decent photos uncovered and a bit of info. The article is from November 1996 Performance Bikes called "SwitchBlade". If no one can get it fast I can scan it a bit later if you want.tanuki wrote:thats its a 600 lump I'm wanting to put in though.
Shame that thread you linked doesnt give much info around what cutting was needed.
I suppose my original post was in answer to CMSMJ1s post mentioning the 900 motor got me started and do realise you want a 600 motor in. But everything helps I think..