HRC NC23 Bike

[Yakama]

Finally found a colour pic of the HRC NC23 like on the front of the HRC Manual

HRC Manual cover:


Colour pic from brochure I recently acquired:




And here is a suzuka 4 hour NC23:

[jim157]

Nice one mate. Interesting to see how quickly the HRC style parts made it onto the production bikes i.e. the high rise pipes on the 88 HRC NSR were added onto the 89 road bike.

[tanuki]

Nice one mate. Interesting to see how quickly the HRC style parts made it onto the production bikes i.e. the high rise pipes on the 88 HRC NSR were added onto the 89 road bike.

They didn't the 23&29 never really changed, there were at least 4 very diferent incarnations of the NSR although admitadly the 21&28 were almost identicle bar pipes, electrics and swingarm.

Why you ask? Because the 2ts won almost everything.

[dunkenb]

My two stroke effort..... http://p1.bikepics.com/2011/04/27/bikep ... 6-full.jpg

[jim157]

Nice one mate. Interesting to see how quickly the HRC style parts made it onto the production bikes i.e. the high rise pipes on the 88 HRC NSR were added onto the 89 road bike.

They didn't the 23&29 never really changed, there were at least 4 very diferent incarnations of the NSR although admitadly the 21&28 were almost identicle bar pipes, electrics and swingarm.

Why you ask? Because the 2ts won almost everything.

I was referring to the NSR's yearly development in the late 80's rather than that of the CBR's. As you say two strokes were the cutting edge of racing technology in those days.

[Yakama]

Nice one mate. Interesting to see how quickly the HRC style parts made it onto the production bikes i.e. the high rise pipes on the 88 HRC NSR were added onto the 89 road bike.

They didn't the 23&29 never really changed, there were at least 4 very diferent incarnations of the NSR although admitadly the 21&28 were almost identicle bar pipes, electrics and swingarm.

Why you ask? Because the 2ts won almost everything.

The 23 & 29 didnt change much but the CBR400 range as a whole did a lot over its lifetime starting from the early CBR400F's to the Aero, Triarm & Gullarm there is a hell of a difference.

Here is some for HRC Kitted CBR400 race bikes:

HRC CBR400RK (Based on the early CBR400F bikes) - Excuse the weird sentences as this is translated from Japanese:

CBR400RK
The embedded HRC F CBR400F-3 kit car
1985 Specifications




Clutch back-torque limiter specifications ('85KIT)
Also inside the main engine shaft for exclusive stage Ⅲ, in part dedicated long connecting rods, pistons, high cam, valve springs, are incorporated and cross Mission.

It is also committed to cover plastic funnel cut pipes for REV.

This '84KIT Type Oil Cooler '85KIT small and made of thick type Sark.

How to set a unique exhaust line up horizontally


KISS replica (Kijima) and YRS was coming from.

This switch supplies a separate clamp to handle castings as well as RS400R (~ I I do not quite)

Suspension undercarriage is: normal appearance and does not change, only products containing a reinforced wheel swing arm inconspicuous place for exclusive spring and damping characteristics are changing in front 275-16 '84KIT, Rear 350-18
250-16 In our front '85KIT (STD), Rear 300-18
Standard setting

84KIT

85KIT


The booklet was also released composite parts list and manual say clever people.

Page 1 of them, in the future I want to like this color

[Yakama]

CBR400RR 1988 SP specification


Seat cowl and the muffler is made with a Moriwaki.
It will also explore the parts of the car to be able to upgrade Moriwaki specification


CBR400RR 1988 model year specification SP
F-kit parts are being used only for about three 広Kunai modification range.

The future, F aircraft owned by the restoration-3 kit parts installed
HRC plans to upgrade to a full vehicle kit.

[Yakama]

CBR400RW-K
(CBR400R F-specification car 3)
Resistant vehicles Honey Bee Racing Team 1987 Suzuka 4 Hours

CBR400R (Aero) F -1987 season of Honey Bee Racing car at 3 specifications, the vehicle had been used for four hours Suzuka endurance and sprint races.
Are subjected to much lighter unusual special parts are used in car parts satellite specifications.

Magnesium wheels, brake with adjustable damping also around special fork for RS250,

The engine would have been tuned for the full satellite (inside because it does not decompose before restoration is unknown)
Head, left cover, oil pan is large Radiator magnesium, ultra light made of SUS exhaust

Also around the shaving special kind of link rear suspension, special swing arm

Incidentally, when the tolerance specifications 1987 4

[selexon]

That Honey Bee Racing Colour scheme is killer!!!

[Yakama]

Nice isnt it, they did a lovely VF400 in a similar scheme too