NC29 race subframe to take RSW250 seat FS limited offer
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Site Supporter
- Reactions:
- Posts: 2807
- Joined: Wed Apr 30, 2008 4:47 pm
- Bike owned: CCM404 SM, CBR4/6 in progress
- Location: Nottingham U.K
NC29 race subframe to take RSW250 seat FS limited offer
I have found someone that will make these out of ally, I need to get the mock up to him soon so need any orders now.
So far I have orders for 4 and that is bringing them in at £80'each
you will have to make your own battery boxes or modifiy your standard one.
This is roughly what it will look like
When fitted with RSW seat unit
And before anyone asks no I don't know if it will fit an NC23
So far I have orders for 4 and that is bringing them in at £80'each
you will have to make your own battery boxes or modifiy your standard one.
This is roughly what it will look like
When fitted with RSW seat unit
And before anyone asks no I don't know if it will fit an NC23
- Kayla850
- NWAA Supporter
- Reactions:
- Posts: 1170
- Joined: Sun Apr 18, 2010 6:30 pm
- Bike owned: Sunn Tzar S2
- Location: County Durham
Re: NC29 race subframe to take RSW250 seat FS limited offer
Wow! That's awesome. Where can I get one of those?
Useful project bike parts and stuff and things-
www.projection-racing.com
Titanium and Aluminium nuts & bolts-
www.pjcfasteners.com
www.projection-racing.com
Titanium and Aluminium nuts & bolts-
www.pjcfasteners.com
-
- Settled in member
- Reactions:
- Posts: 115
- Joined: Wed May 21, 2008 8:25 am
- Bike owned: VFR 400 NC 30, ZXR 400
- Location: Scarborough, North Yorkshire
Re: NC29 race subframe to take RSW250 seat FS limited offer
Hi
I am interested in one of these - just a few questions
Does the RSW seat mount on the original front mounts or is it just the two bolts from the top?
Any provision for exhaust mounting?
Thanks
Tony
I am interested in one of these - just a few questions
Does the RSW seat mount on the original front mounts or is it just the two bolts from the top?
Any provision for exhaust mounting?
Thanks
Tony
-
- Senior Member
- Reactions:
- Posts: 1269
- Joined: Thu Aug 19, 2010 1:52 am
- Bike owned: CBR400RR NC23
- Location: West Bromwich UK
- Contact:
Re: NC29 race subframe to take RSW250 seat FS limited offer
will it fit the 23??
i jest
i jest
-
- Site Supporter
- Reactions:
- Posts: 2807
- Joined: Wed Apr 30, 2008 4:47 pm
- Bike owned: CCM404 SM, CBR4/6 in progress
- Location: Nottingham U.K
Re: NC29 race subframe to take RSW250 seat FS limited offer
Hi was chatting to the fabricator last night about exhaust hangers ally ones will be available for £10.tfr125 wrote:Hi
I am interested in one of these - just a few questions
Does the RSW seat mount on the original front mounts or is it just the two bolts from the top?
Any provision for exhaust mounting?
Thanks
Tony
The seat unit uses the 2 rear bolts only at the moment but when I get the prototype from him I will mock up some brackets that will use the lower subframe mount allowing you to use the lower mounting holes on the seat unit as well. I would imagine thesewould cost no more than £5.
I'm sending him the mock up today so I'm hoping to have the prototype back in a couple of weeks.
He also said they will look a lot better than the SES one in the picture :)
Cheers
-
- Site Supporter
- Reactions:
- Posts: 387
- Joined: Sun May 04, 2008 4:57 am
- Bike owned: Only 2 left.....
- Location: Northern Ireland and the Middle East
Re: NC29 race subframe to take RSW250 seat FS limited offer
I'll have one.
Cheers
Cheers
- selexon
- Site Supporter
- Reactions:
- Posts: 140
- Joined: Wed Dec 08, 2010 9:55 am
- Bike owned: FZR400R 2TK, CBR400RR NC29
- Location: Launceston, Tasmania
- Contact:
Re: NC29 race subframe to take RSW250 seat FS limited offer
Can u do a rough calc on postage to Aus, on guestamate weight? Just need to find a seat unit locally...
-
- Site Supporter
- Reactions:
- Posts: 2807
- Joined: Wed Apr 30, 2008 4:47 pm
- Bike owned: CCM404 SM, CBR4/6 in progress
- Location: Nottingham U.K
Re: NC29 race subframe to take RSW250 seat FS limited offer
As soon as I have the mock up in my hand yes mate no problem.
-
- Site Supporter
- Reactions:
- Posts: 2807
- Joined: Wed Apr 30, 2008 4:47 pm
- Bike owned: CCM404 SM, CBR4/6 in progress
- Location: Nottingham U.K
Re: NC29 race subframe to take RSW250 seat FS limited offer
Right guys I've sticky'd this.
The deal so far is, I'm just waiting to get a mock up back from Sie so we can then put our input into the finished item.
He will also be sending me a mock up of the exhaust hanger wihich will be £10, there will also be spacers needed for the bottom mounting bolts and if wanted brackets for the bottom mounting holes on the seat untit but all of this will become clear once we have the mock up.
Takers so far:
Tanuki
Chrisja
Sexalon (depending on postage to Aus)
Justmartyn
Cajun
Any more takes tag your name on the thread.
Cheers
The deal so far is, I'm just waiting to get a mock up back from Sie so we can then put our input into the finished item.
He will also be sending me a mock up of the exhaust hanger wihich will be £10, there will also be spacers needed for the bottom mounting bolts and if wanted brackets for the bottom mounting holes on the seat untit but all of this will become clear once we have the mock up.
Takers so far:
Tanuki
Chrisja
Sexalon (depending on postage to Aus)
Justmartyn
Cajun
Any more takes tag your name on the thread.
Cheers
-
- Familiar Member
- Reactions:
- Posts: 369
- Joined: Sat Jun 13, 2009 4:06 am
- Bike owned: MC22, NC29,NC35, 2 FZR400's
- Location: New Orleans, LA USA
Re: NC29 race subframe to take RSW250 seat FS limited offer
Put me down for the bracket as well.