Where to fit X-Ring on clutch lift on NC35?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 44
- Joined: Sat Apr 27, 2019 6:52 pm
- Bike owned: GSF ZXR RVF FZR GSXR
- Contact:
Where to fit X-Ring on clutch lift on NC35?
hi all,
I just bought a set of gaskets, rings, o-rings, x-rings, etc. to replace all of them on my NC35 '94 (cf my other post on oil sump gasket).
However, I do not understand where to fit the 91301-ML0 X-Ring with the clutch lift, since there was no x-ring when I removed sprocket cover and clutch mecanism.
I have the Haynes manual but nothing about this x-ring (if you know where, please could you give me the page ), and here the link to the Honda parts , it is the number 14 on the picture.
https://www.bike-parts.fr/honda-moto/40 ... 08/1/16520
Many thanks!
I just bought a set of gaskets, rings, o-rings, x-rings, etc. to replace all of them on my NC35 '94 (cf my other post on oil sump gasket).
However, I do not understand where to fit the 91301-ML0 X-Ring with the clutch lift, since there was no x-ring when I removed sprocket cover and clutch mecanism.
I have the Haynes manual but nothing about this x-ring (if you know where, please could you give me the page ), and here the link to the Honda parts , it is the number 14 on the picture.
https://www.bike-parts.fr/honda-moto/40 ... 08/1/16520
Many thanks!
-
- Familiar Member
- Reactions:
- Posts: 311
- Joined: Tue Nov 24, 2020 12:53 pm
- Bike owned: FZR400,600, CBR893
Re: Where to fit X-Ring on clutch lift on NC35?
Looking at the photo it appears it should sit over part number 8, possibly in the centre, hence the profile of part 8 in the pic.
-
- Settled in member
- Reactions:
- Posts: 44
- Joined: Sat Apr 27, 2019 6:52 pm
- Bike owned: GSF ZXR RVF FZR GSXR
- Contact:
Re: Where to fit X-Ring on clutch lift on NC35?
Thanks MadMotoUK, I was wondering if it could be there, cause it seems quite narrow to sit over it, but i managed to