NC31 NC39 NC42 fork interchangeability
Posted: Mon Jan 31, 2022 7:37 am
Hi all,
just recently got 1993 CB400SF .
I would like to swap out the 2 pot calipers to 4 pot golden nissin that can be found on later models.
One of the option is to get cnc machined bracket to fit those, but would like more cleaner look if possible.
According to mine internet research all of these models use showa 41 forks and should be fairly easy to swap them .
From my estimate I should be able to either swap both forks and still use same wheel and yoke. or even just swap the fork boot.
Am I far off ?
just recently got 1993 CB400SF .
I would like to swap out the 2 pot calipers to 4 pot golden nissin that can be found on later models.
One of the option is to get cnc machined bracket to fit those, but would like more cleaner look if possible.
According to mine internet research all of these models use showa 41 forks and should be fairly easy to swap them .
From my estimate I should be able to either swap both forks and still use same wheel and yoke. or even just swap the fork boot.
Am I far off ?