VFR400 NC24 Fork rebuild
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Ancientmatiner
- Settled in member
- Reactions:
- Posts: 9
- Joined: Thu Jul 22, 2021 8:46 am
VFR400 NC24 Fork rebuild
Hi all,
Having stripped my forks and being ready to rebuild I have notes a few issues.
For reference the drawing I am using is here: https://images.cmsnl.com/img/partslists ... 9_0360.gif
Firstly, the right fork does not have an aluminium cone but what can only be described as a plastic bush. I guess it was doing the job but don't know if this is correct. I can see from the drawing that the one side has an aluminium cone and the other is different (item 15)?
Second when I stripped the forks parts 18 and 19 were not present. I have noted on the site the drawing is off these are not actually listed as spares on their site so are these nor actually used?
Any advice much appreciated.
Having stripped my forks and being ready to rebuild I have notes a few issues.
For reference the drawing I am using is here: https://images.cmsnl.com/img/partslists ... 9_0360.gif
Firstly, the right fork does not have an aluminium cone but what can only be described as a plastic bush. I guess it was doing the job but don't know if this is correct. I can see from the drawing that the one side has an aluminium cone and the other is different (item 15)?
Second when I stripped the forks parts 18 and 19 were not present. I have noted on the site the drawing is off these are not actually listed as spares on their site so are these nor actually used?
Any advice much appreciated.