nc35 tidy up

sand380 · Post by **sand380** » Sun May 23, 2021 8:23 pm

I was kidding mate, I meant the holes are slightly worn.
the holes started life as a m10 but times taken its toll.
I just checked a spare one and that's the same.
checked the one on my nc30 and that's the same too ffs.

I'll most probably machine a few brass bushes to make them right.

theres no slop when pulling the swingarm but it's not right so wants sorting

sand380 · Post by **sand380** » Sun May 23, 2021 9:08 pm

hub, sidestand and yokes fitted together.

should be a rolling bike in the next day or 2.

just waiting on the postie before I can go much further

sand380 · Post by **sand380** » Tue May 25, 2021 12:05 am

delete repeated words

fitted some new supercorsas.
put the new 520 sprockets on. spent 5 minutes thinking I'd forgotten to fit something as the sprocket bolts threads stand out so far. then remembered the 520 sprocket much thinner Doh!

sand380 · Post by **sand380** » Tue May 25, 2021 12:07 am

bikes booked in for paint for the 28th june so the pressure is on!

richyrd5 · Post by **richyrd5** » Tue May 25, 2021 3:21 pm

Looking very nice

sand380 · Post by **sand380** » Wed May 26, 2021 12:16 am

thanks, it's been wonderful to work on something straight forward where everything just bolts together.

a big box from tyga performance arrived today containing the endurance fairing. great quality. especially for pattern stuff.

finished replacing the connector blocks. loom is on and we have sparks :) phew!

sand380 · Post by **sand380** » Wed May 26, 2021 2:11 pm

wiring is pretty much sorted. dash fitted and works.

it's a ex race bike and has been thrown at the scenery plenty.... as a result of this the bottom yoke is tweaked for certain.

forks seem straight. I'll find out for sure when they go for a revalve for sure.

rims are straight as is the front wheel spindle.

thankfully tyga bottom yokes are a nice weight saving and reasonable price wise

sand380 · Post by **sand380** » Wed May 26, 2021 2:14 pm

one die games

couldn't resist trying the rear wheel on. Sweeet!

sand380 · Post by **sand380** » Sat May 29, 2021 12:13 am

one die games

rear disc finally arrived from China for 25 quid.

I wasnt expecting much for less than 30 quid but its identical to the stock one. looks lovely.

rear caliper has been stripped and sent for powdercoating.

forgot to get a few bits plated so they are now going.

it's now been lifted from the motorcross stand and is back on a proper paddock stand. starting to get close now although theres still plenty to do

richyrd5 · Post by **richyrd5** » Sat May 29, 2021 8:14 am

Looks sweet...keep it coming

nc35 tidy up

Re: nc35 tidy up

Re: nc35 tidy up

Re: nc35 tidy up

Re: nc35 tidy up

Re: nc35 tidy up

Re: nc35 tidy up

Re: nc35 tidy up

Re: nc35 tidy up

Re: nc35 tidy up

Re: nc35 tidy up