Hi All

I'm troubling removing the rear lower engine mounting bolt and hope you can help me out, solving the problem.
I have removed the nut on the lefthand side and the castle nut on the righthand side.

Can I hammer it out from the left side of the bike or is it screwed into the frame? (It is not clear to me, via the manual).

Thnaks in advance!

Pictures:
https://ibb.co/ct31GBD
https://ibb.co/0XJmhzF
https://ibb.co/CQb3mXy

/Esben

Put the nut back on a few threads and hit it a smack with the hammer to loosen it up. Hitting the pin directly will damage the threads

Get some penetrating fluid too, dont want to be doom and gloom but Ive helped a friend cut one of those out before