RVF 400 rear brake return spring
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 8
- Joined: Thu Apr 12, 2018 2:14 pm
RVF 400 rear brake return spring
I am attempting to install after market rear sets on my 1994 RVF 400. In order to do that I have to add a banjo bolt pressure switch and a return spring to the rear brake. Does any one know what size return spring I need for this application? Woodcraft makes springs but I am unsure what size since they don't have the RVF listed. Thanks
Sent from my SM-G930T using Tapatalk
Sent from my SM-G930T using Tapatalk
- CMSMJ1
- Moderators
- Reactions:
- Posts: 9806
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: RVF 400 rear brake return spring
I'd go with a pukka HRC elastic band for now :)
And then would look to find one of the small ones that spring off the bottom of the shaft - find one adn experiment.
I use WR Battlestep pegs - and use elastic on it...I should probably find a small spring
And then would look to find one of the small ones that spring off the bottom of the shaft - find one adn experiment.
I use WR Battlestep pegs - and use elastic on it...I should probably find a small spring
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
- Tim400GB
- Site Supporter
- Reactions:
- Posts: 1168
- Joined: Mon Jan 04, 2010 7:24 pm
- Bike owned: 1 x NC30, 2 x NC32.5,
- Location: SE Greater London
Re: RVF 400 rear brake return spring
I asked a similar question a while back and got pointed to these.
https://www.ebay.co.uk/itm/Exhaust-Clam ... 2553207622
Never actually got round to buying one and trying it but might be worth a punt
https://www.ebay.co.uk/itm/Exhaust-Clam ... 2553207622
Never actually got round to buying one and trying it but might be worth a punt
-
- Settled in member
- Reactions:
- Posts: 8
- Joined: Thu Apr 12, 2018 2:14 pm
Re: RVF 400 rear brake return spring
https://www.fasstco.com/products/rear-b ... urn-spring I am ording one of these today after I double check the sizes. I will update once It comes in.Timon wrote:I asked a similar question a while back and got pointed to these.
https://www.ebay.co.uk/itm/Exhaust-Clam ... 2553207622
Never actually got round to buying one and trying it but might be worth a punt
Sent from my SM-G930T using Tapatalk