what's the part number?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- NWAA Supporter
- Reactions:
- Posts: 319
- Joined: Tue Jan 19, 2016 9:22 pm
what's the part number?
What's the part number of a Magtek front wheel bearing?
- CMSMJ1
- Moderators
- Reactions:
- Posts: 9806
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: what's the part number?
Have a look on the fiche?
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
-
- NWAA Supporter
- Reactions:
- Posts: 319
- Joined: Tue Jan 19, 2016 9:22 pm
- CMSMJ1
- Moderators
- Reactions:
- Posts: 9806
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: what's the part number?
the fiches are on this site :)
http://www.400greybike.com/docs.htm
The bearing is a 6022 - so get one from any bearing supplier. double sealed is 6022RS (or something - it is the numbers that denote the fitment)
http://www.400greybike.com/docs.htm
The bearing is a 6022 - so get one from any bearing supplier. double sealed is 6022RS (or something - it is the numbers that denote the fitment)
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
-
- NWAA Supporter
- Reactions:
- Posts: 319
- Joined: Tue Jan 19, 2016 9:22 pm
Re: what's the part number?
Do you think any supplier can manage that bearing codes? That is to say in the UK as well as here in northern italy? I'll take in account thanks. But what about oem part number?CMSMJ1 wrote: ↑Sun Dec 09, 2018 7:17 pmthe fiches are on this site :)
http://www.400greybike.com/docs.htm
The bearing is a 6022 - so get one from any bearing supplier. double sealed is 6022RS (or something - it is the numbers that denote the fitment)
-
- Settled in member
- Reactions:
- Posts: 39
- Joined: Fri Apr 06, 2018 7:52 am
- Bike owned: VFR400RH, VF1000RG
Re: what's the part number?
I would recommend using SKF or FAG bearing.
Yes, these numbers are unique for size, everyone uses the same. 6022 has 11 cm axle, needs a 17 cm hole in the Wheel and 2,8 cm thick -> I assume there is a typo!!!
Some extra characters indicate, if you have none sealed, double sealed (plastic or metall) ....
If you have the old bearing just measure those 3 values and you can search to get the number. I did this for my two bikes (wheels & swingarm) and bought bearing and shaft seals via eBay.
Yes, these numbers are unique for size, everyone uses the same. 6022 has 11 cm axle, needs a 17 cm hole in the Wheel and 2,8 cm thick -> I assume there is a typo!!!
Some extra characters indicate, if you have none sealed, double sealed (plastic or metall) ....
If you have the old bearing just measure those 3 values and you can search to get the number. I did this for my two bikes (wheels & swingarm) and bought bearing and shaft seals via eBay.
- CMSMJ1
- Moderators
- Reactions:
- Posts: 9806
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: what's the part number?
Of course - that is the "code" - it'll be the same wherever you are for ordering it. If you have the wheel with bearing in it, you might see the code stamped on it.ligurt wrote: ↑Sun Dec 09, 2018 10:20 pmDo you think any supplier can manage that bearing codes? That is to say in the UK as well as here in northern italy? I'll take in account thanks. But what about oem part number?CMSMJ1 wrote: ↑Sun Dec 09, 2018 7:17 pmthe fiches are on this site :)
http://www.400greybike.com/docs.htm
The bearing is a 6022 - so get one from any bearing supplier. double sealed is 6022RS (or something - it is the numbers that denote the fitment)
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
- CMSMJ1
- Moderators
- Reactions:
- Posts: 9806
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: what's the part number?
To add - you mention a 1996 bike for the wheel? Which bike?
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
-
- NWAA Supporter
- Reactions:
- Posts: 319
- Joined: Tue Jan 19, 2016 9:22 pm
Re: what's the part number?
Great help, by the way your avatar is mind disturbing...CMSMJ1 wrote: ↑Mon Dec 10, 2018 11:33 amOf course - that is the "code" - it'll be the same wherever you are for ordering it. If you have the wheel with bearing in it, you might see the code stamped on it.ligurt wrote: ↑Sun Dec 09, 2018 10:20 pmDo you think any supplier can manage that bearing codes? That is to say in the UK as well as here in northern italy? I'll take in account thanks. But what about oem part number?CMSMJ1 wrote: ↑Sun Dec 09, 2018 7:17 pmthe fiches are on this site :)
http://www.400greybike.com/docs.htm
The bearing is a 6022 - so get one from any bearing supplier. double sealed is 6022RS (or something - it is the numbers that denote the fitment)
-
- NWAA Supporter
- Reactions:
- Posts: 319
- Joined: Tue Jan 19, 2016 9:22 pm
Re: what's the part number?
I don't know exactely. The wheel is the front Magtek 3.5x17.... so i desume it's from a 1996 rs250 or so. If any of you have more detailled informations they are over welcome