what's the part number?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- NWAA Supporter
- Reactions:
- Posts: 316
- Joined: Tue Jan 19, 2016 9:22 pm
Re: what's the part number?
this is it
- CMSMJ1
- Moderators
- Reactions:
- Posts: 9806
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: what's the part number?
Look on the red sealed bit of that bearing - you might see the code for it
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
-
- Settled in member
- Reactions:
- Posts: 39
- Joined: Fri Apr 06, 2018 7:52 am
- Bike owned: VFR400RH, VF1000RG
Re: what's the part number?
Or it is lasered into the outer metal ring. Just from looking at the pic I would assume it is 6004 (42 mm outer diameter, 20 mm axle, 12 mm wide).
Did you try to get the bearings out? I see no place for shaft seals. On my Honda rims there is place to install the shaft seals into the rim.
Did you try to get the bearings out? I see no place for shaft seals. On my Honda rims there is place to install the shaft seals into the rim.
- JZH
- Site Supporter
- Reactions:
- Posts: 368
- Joined: Mon Oct 27, 2008 7:02 pm
- Bike owned: RSCBRRVFVFRST
- Location: London, UK/So.Cal., USA
- Contact:
Re: what's the part number?
Most bearings used on Hondas are "standard" automotive/industrial bearings, which means that they come in standard sizes and are identified by standard bearing codes, e.g., 6004 (Honda pn 91054-MN8-741), 32006 (Honda pn 91016-KT8-005). This web page (http://www.vsource.org/VFR-RVF_files/BBearings.htm) concerns my VFR750FP, but you will find that the NC30 shares a lot of the same bearings and seals. Some bearings are Honda-only, so most bearing suppliers won't be able to help, but there are sometimes alternatives that can be used.
Ciao,
JZH
Ciao,
JZH
-
- NWAA Supporter
- Reactions:
- Posts: 316
- Joined: Tue Jan 19, 2016 9:22 pm
Re: what's the part number?
Want to thank you all for the great help.
This is the ral meaning of the forum.
Ciao
Pietro
This is the ral meaning of the forum.
Ciao
Pietro