Rear wheel
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Site Supporter
- Reactions:
- Posts: 873
- Joined: Thu Jul 15, 2010 12:59 pm
- Bike owned: NC23 NC30 CRM250
- Location: West Midlands
Rear wheel
I have removed the large nut and spacer but the wheel won’t come off. Is anything else holding it on or do I need to go at it with a hammer? It has stood for 5 years so I fear its stuck solid
-
- Familiar Member
- Reactions:
- Posts: 298
- Joined: Fri Aug 26, 2016 10:17 am
- Bike owned: 3 x NC35, 3x NC24, NC29, RC46
- Location: London
Re: Rear wheel
Reattach nut - with it undone 3 or 4 turns.
Put bike on the ground, on the wheels, hit the TYRE from left to right with a large 2 x 4 block of wood at the back of the bike (1 hit - IT DOESN'T NEED TO KNOCK OUT MIKE TYSON) - roll forward 1/4 turn do the same again - repeat around the wheel.. once the wheel has moved so its touching the nut put it back on the stand, undo nut & it should then come off.
Put bike on the ground, on the wheels, hit the TYRE from left to right with a large 2 x 4 block of wood at the back of the bike (1 hit - IT DOESN'T NEED TO KNOCK OUT MIKE TYSON) - roll forward 1/4 turn do the same again - repeat around the wheel.. once the wheel has moved so its touching the nut put it back on the stand, undo nut & it should then come off.