what bike it comes from?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
ligurt
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 316
Joined: Tue Jan 19, 2016 9:22 pm
what bike it comes from?

Post by ligurt » Tue Sep 12, 2017 10:47 pm

Can you tell me what bike this wheel comes from? Is it rc30 or rs250 or what else? And is there a way to fit on the nc30/35 hub, or which mods are necessary?
Image
Image
Top
User avatar
Yakama
Site Supporter
Site Supporter
Reactions:
Posts: 2676
Joined: Wed Apr 30, 2008 5:27 pm
Bike owned: NC23s, 29, 30s, MC16
Location: Oban
Re: what bike it comes from?

Post by Yakama » Wed Sep 13, 2017 1:08 pm

RC30 HRC mag? An RS250 would have the spokes the wrong way round for an NC30. Should fit an nc30 but you will need the rc30 spacer part no 9 here:

https://www.cmsnl.com/honda-vfr750r-rc3 ... ml#results
Top
ligurt
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 316
Joined: Tue Jan 19, 2016 9:22 pm
Re: what bike it comes from?

Post by ligurt » Wed Sep 13, 2017 4:50 pm

Yakama wrote:RC30 HRC mag? An RS250 would have the spokes the wrong way round for an NC30. Should fit an nc30 but you will need the rc30 spacer part no 9 here:

https://www.cmsnl.com/honda-vfr750r-rc3 ... ml#results
Thanks Yakama, spacer would bre the less, but what about the diameter? Would the nc30 hub and spindle work correctly?
Top
User avatar
RickOliver
Site Supporter
Site Supporter
Reactions:
Posts: 536
Joined: Sun May 11, 2008 8:55 am
Re: what bike it comes from?

Post by RickOliver » Fri Sep 15, 2017 3:59 pm

I would suggest that it`s an RC30 race mag which someone has modified to fit an NC30 by adding cutouts to clear the disc bolts (see this thread - viewtopic.php?f=22&t=53881)

Contact me if you are in need of an RC30 wheel spacer.

Rick
Top
ligurt
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 316
Joined: Tue Jan 19, 2016 9:22 pm
Re: what bike it comes from?

Post by ligurt » Fri Sep 15, 2017 9:18 pm

RickOliver wrote:I would suggest that it`s an RC30 race mag which someone has modified to fit an NC30 by adding cutouts to clear the disc bolts (see this thread - viewtopic.php?f=22&t=53881)

Contact me if you are in need of an RC30 wheel spacer.

Rick
Thanks a lot Rick.
My intention is to fit the 4,00-18 rc30 rear wheel, I don't care to fit a large size tyre. The 150/60/18 is perfect for my project and it would have to fit on the 4 inches rim. My only misgiving is about the centre bore that is 40mm on the rc rim and 45mm on my magtek and related spacer/center lock. How much would it cost?
Is there an rc30 4,00-18 rim in the surroundings. I could also swap for my perfectly restored 4,50x17 magtek.
Top
Post Reply

Return to “Honda - Workshop”