NC30 Sump plug size

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
st22041967
Settled in member
Reactions:
Posts: 72
Joined: Tue Jan 05, 2016 12:23 pm
Bike owned: NC30 Grey Import
NC30 Sump plug size

Post by st22041967 » Mon Sep 04, 2017 11:26 pm

sooooooooo long story short, I've stripped (or started to strip) my sump plug. I'm going to use a helicoil/recoil to redo the tread but 1st off I need to get the right size kit.

Now I could wait until I've drained the oil out to measure the sump bolt but I was hoping that perhaps somebody here could tell me the spec of the bolt. I am going to be attempting this all WITHOUT removing the sump.

I believe it's a 12mm bolt but I don't know the pitch.

If anybody knows the spec or has any experience I would be grateful. Please bear in mind that if I get the wrong kit I've pissed my money away so if you don't know the spec for an actual fact then probably best not to give me your "best guess" or "if I remember correctly" :grin:

Thanks in advance guys.

Stu

magg
Senior Member
Reactions:
Posts: 1910
Joined: Mon Sep 20, 2010 11:55 pm
Bike owned: VFR400
Location: Blue Mountain NSW Australia
Re: NC30 Sump plug size

Post by magg » Tue Sep 05, 2017 1:45 am

12x1.5 mm

st22041967
Settled in member
Reactions:
Posts: 72
Joined: Tue Jan 05, 2016 12:23 pm
Bike owned: NC30 Grey Import
Re: NC30 Sump plug size?

Post by st22041967 » Tue Sep 05, 2017 9:56 am

Thanks for that, much appreciated.


Post Reply