Floating rotors nc21
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 27
- Joined: Fri Dec 16, 2016 1:31 pm
- Bike owned: Honda VFR400K
- Location: UK East anglia
Floating rotors nc21
The current rotors on my nc21 are fixed, are there any issues with swapping these for floating/semi floating ones? Probably a silly question but would rather be safe than sorry
- CMSMJ1
- Moderators
- Reactions:
- Posts: 9806
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: Floating rotors nc21
You would have to ask why? fixed are no issue for a bike such as the NC21 (or RC24s and CBR600F1) etc..
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
-
- Moderators
- Reactions:
- Posts: 9358
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: Floating rotors nc21
You are intending to upgrade to NC24 rotors?
There isnt much benefit but you should measure your original discs.
Depending on which model of NC21 it is it might have 255mm discs... the NC24 rotors are 276mm.
I cant remember offhand but i think the mounting points between the NC24 / NC21 forks are the same, if they are then you would just need the NC24 calipers and mounting brackets, or even just the NC24 caliper mounting brackets to make use of the 276mm discs.
There isnt much benefit but you should measure your original discs.
Depending on which model of NC21 it is it might have 255mm discs... the NC24 rotors are 276mm.
I cant remember offhand but i think the mounting points between the NC24 / NC21 forks are the same, if they are then you would just need the NC24 calipers and mounting brackets, or even just the NC24 caliper mounting brackets to make use of the 276mm discs.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
- Settled in member
- Reactions:
- Posts: 27
- Joined: Fri Dec 16, 2016 1:31 pm
- Bike owned: Honda VFR400K
- Location: UK East anglia
Re: Floating rotors nc21
Thankyou for your help thinking i will leave thsm for now may play around later