NC35 quickshifter

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
jedidude04
Settled in member
Reactions:
Posts: 73
Joined: Thu Jun 30, 2016 2:19 am
Bike owned: RVF400
Location: Australia, NSW
Re: NC35 quickshifter

Post by jedidude04 » Sun Mar 05, 2017 12:08 am

violetpop wrote:Just wired up a Healtech iqse2 and set to 55ms, tested it at the track last week and it was perfect.
Did you use a bike specific wiring kit for the iqse2? Looks like a very good sensor + stand alone module however cant find a kit that Healtech provides for the rvf400.

Does it connect to the ignition coils?

User avatar
Variablevalves suck
Site Supporter
Site Supporter
Reactions:
Posts: 2608
Joined: Sat Jan 24, 2009 10:52 am
Bike owned: GSXR Carb o'ring kits supplied
Location: Stoke-on-trent
Re: NC35 quickshifter

Post by Variablevalves suck » Sun Mar 05, 2017 10:09 pm

The factory pro spring kits work well on the gsxr, no reason they wont work on the nc, although the Honda box does change like its made of stone compared to the Suzi box.

SPOONDIDDLY
Settled in member
Reactions:
Posts: 85
Joined: Thu Mar 20, 2014 9:05 pm
Re: NC35 quickshifter

Post by SPOONDIDDLY » Mon Nov 06, 2017 9:58 am

jedidude04 wrote:
violetpop wrote:Just wired up a Healtech iqse2 and set to 55ms, tested it at the track last week and it was perfect.
Did you use a bike specific wiring kit for the iqse2? Looks like a very good sensor + stand alone module however cant find a kit that Healtech provides for the rvf400.

Does it connect to the ignition coils?
Sorry to revive this thread, however I'm keen to know about which wiring kit was used?

SPOONDIDDLY
Settled in member
Reactions:
Posts: 85
Joined: Thu Mar 20, 2014 9:05 pm
Re: NC35 quickshifter

Post by SPOONDIDDLY » Fri Nov 24, 2017 12:58 pm

Nobody has used this quickshifter and can shed some light?

magg
Senior Member
Reactions:
Posts: 1910
Joined: Mon Sep 20, 2010 11:55 pm
Bike owned: VFR400
Location: Blue Mountain NSW Australia
Re: NC35 quickshifter

Post by magg » Sat Nov 25, 2017 11:49 am

You could try Healtech tech support. Healtech claims the iqse2 setup is for CDI and not TCI which is fitted to the NC30/35. If Healtech are unwilling to help you will be forced to buy the iqse-1 module and make your own loom or find someone who can.

jedidude04
Settled in member
Reactions:
Posts: 73
Joined: Thu Jun 30, 2016 2:19 am
Bike owned: RVF400
Location: Australia, NSW
Re: NC35 quickshifter

Post by jedidude04 » Fri Mar 16, 2018 4:41 pm

I ended up getting an ignitech cdi + quickshifter. Had to wire the sensor to the cdi and then attach it to earth (cut off taillight earth and crimped that).
Works really well and is actually a really smooth sensor set at 60ms

Holy smokes revival lol


Post Reply