NC35 rear hub disassembly

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
manicguitarist
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 691
Joined: Mon Oct 06, 2014 11:39 am
Bike owned: RVF400 (NC35)
Location: Rossendale, Lancashire
Re: NC35 rear hub disassembly

Post by manicguitarist » Sun Jul 16, 2017 5:00 pm

Holy thread resurrection batman!

I need to change rear disc. So hub needs to come out.

My Haynes book of lies doesn't mention a circlip. What circlip?

And confirm 46mm for hub nut? Before I go to the tool shop tomorrow...

jedidude04
Settled in member
Reactions:
Posts: 73
Joined: Thu Jun 30, 2016 2:19 am
Bike owned: RVF400
Location: Australia, NSW
Re: NC35 rear hub disassembly

Post by jedidude04 » Tue Jul 18, 2017 7:14 am

Big nut on left is 46mm, i use an impact socket. I get the hub off by unstaking it, using a breaker bar, have the rear brake pedal held down with bottle of oil and wheel on the ground. No problems. Hub torque is i think 210 nm however - TIGHT.

I think there is a circlip but i removed my entire piece from the swingarm and cant remember it.

And yeah holy thread resurrection lul


Post Reply