Superjack44, thanks for the pics you posted. It's good to have options...

I need a rack fora '92 SF
Anyone got any links to any sites selling ?

Hi Mushroom, try Kenma, they make a Ventura Rack for the 92sf, I have one as well...

Will see if I can find link for you...

Sent from my CPH1607 using Tapatalk

Part kit from Ventura for the 92-96 CB400 is H094PF
This is the l brackets and rack..
Link is www.kenma.com.au and choose the Ventura tab

Sent from my CPH1607 using Tapatalk

Thanks for the reply, I'm in the UK and those Ventura racks are expensive https://www.ventura-bike.co.uk/fitments ... nc_31.aspx
They emailed me back the other day and it worked out over £150

I've been googling and found that the Givi 241F monorack arms fit and that's a third of the price
https://www.sportsbikeshop.co.uk/motorc ... rod/206650

A follow-up on my original post back in 2013... I found a locally made top-box base which is off the same blue-print as the factory specs etc.

I'll send some pics soon...
Haven't been on my bike since January 2015 as the result of an accident with a taxi.
The bike is officially written-off but actually I'm currently breathing life back into the bike as the frame was not damaged so much.

Now as I have had the inevitable accident, the slow-motion flight was quite the experience...
Only significant negatives for me were losing my bike as a practical mode of daily transport... losing my confidence to be on the same road as taxi drivers who like to do sudden U-turns in front of oncomeing traffic... the five months I spent with a moon boot in pain due to the broken small bone beneath my right ankle...

...it could have been worse... it could have been much worse...

Photos soon

Cheers

I broke two of those Ventura racks. They are not designed for a top box & intended to carry a pair of waterproofs at best . Webike in Japan has quite a few carriers but mainly for NC39/42's.

cb400f1 wrote:I broke two of those Ventura racks. They are not designed for a top box & intended to carry a pair of waterproofs at best . Webike in Japan has quite a few carriers but mainly for NC39/42's.

That's good to know as my wife uses a large capacity twin helmet sized Givi normally

I'll go for those Givi bars and top plate

OK all sorted now
Givi 241F arms for a '95 CB500
Givi M3 top plate
Givi Maxia topbox

You have to make slots in the plastic seat undertray to make the arms line up correctly with the holes

IMG_20171119_132953 by Dave Gale, on Flickr

here is another rack but one off the shelf https://recraftmoto.com/luggage-equipme ... 1992-1998/