vfr 400 nc30 rear banjo brake line bolt

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
marcus57
Site Supporter
Site Supporter
Reactions:
Posts: 2304
Joined: Sun Jul 04, 2010 1:21 pm
Bike owned: nc30, nc35, gsxr750
Location: Taunton
vfr 400 nc30 rear banjo brake line bolt

Post by marcus57 » Wed Jul 28, 2010 11:41 pm

alright guys i need a banjo break light switch for my rear sets , what size is the bolt? iv found them for sale online but i dont know what size i need.

User avatar
ibby4585
Site Supporter
Site Supporter
Reactions:
Posts: 4776
Joined: Tue Jun 16, 2009 1:42 pm
Bike owned: SP's
Location: oxfordshire
Re: vfr 400 nc30 rear banjo brake line bolt

Post by ibby4585 » Thu Jul 29, 2010 9:23 am


Neosophist
Moderators
Moderators
Reactions:
Posts: 9358
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: vfr 400 nc30 rear banjo brake line bolt

Post by Neosophist » Thu Jul 29, 2010 11:54 am

Thats the baby.

10 x 1.25 is the thread / pitch if you decide to source one from else where
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...

marcus57
Site Supporter
Site Supporter
Reactions:
Posts: 2304
Joined: Sun Jul 04, 2010 1:21 pm
Bike owned: nc30, nc35, gsxr750
Location: Taunton
Re: vfr 400 nc30 rear banjo brake line bolt

Post by marcus57 » Thu Jul 29, 2010 5:15 pm

spot on , the rear sets have been sat in the garage for 6 weeks once i get this i can also get my new goodridge hoses on.

User avatar
porndoguk
Site Supporter
Site Supporter
Reactions:
Posts: 6406
Joined: Wed Jun 16, 2010 11:17 pm
Bike owned: NC30
Location: Middle England
Contact:
Re: vfr 400 nc30 rear banjo brake line bolt

Post by porndoguk » Thu Jul 29, 2010 9:56 pm

i like the idea of this is it ok to use with the standard rear sets and remove the spring and switch?

User avatar
ibby4585
Site Supporter
Site Supporter
Reactions:
Posts: 4776
Joined: Tue Jun 16, 2009 1:42 pm
Bike owned: SP's
Location: oxfordshire
Re: vfr 400 nc30 rear banjo brake line bolt

Post by ibby4585 » Thu Jul 29, 2010 10:16 pm

Yeah it looks a lot cleaner. you will need to pull the wires out of the original connecter and wiggle them back in the banjo one, you might need to cut a little bit of plastic from the connector to get the wires out but its worth the hassle as you keep the standard connectors.
Kris

User avatar
porndoguk
Site Supporter
Site Supporter
Reactions:
Posts: 6406
Joined: Wed Jun 16, 2010 11:17 pm
Bike owned: NC30
Location: Middle England
Contact:
Re: vfr 400 nc30 rear banjo brake line bolt

Post by porndoguk » Thu Jul 29, 2010 10:42 pm

ibby4585 wrote:Yeah it looks a lot cleaner. you will need to pull the wires out of the original connecter and wiggle them back in the banjo one, you might need to cut a little bit of plastic from the connector to get the wires out but its worth the hassle as you keep the standard connectors.
Kris
you got one on your kris?

they tolerant to a bit of heat ie without a head shield?

i removed the heat sheild last weekend and made a smaller alloy one just to cover the switch and master cylinder which is just hidden behind the rear set looks slick!

User avatar
ibby4585
Site Supporter
Site Supporter
Reactions:
Posts: 4776
Joined: Tue Jun 16, 2009 1:42 pm
Bike owned: SP's
Location: oxfordshire
Re: vfr 400 nc30 rear banjo brake line bolt

Post by ibby4585 » Thu Jul 29, 2010 10:46 pm

I dont run a heatsheild on any of my bikes, they look horrible. just position the banjo wire on the outside of the frame. When you fit it you will see the banjo rubber joint kinda buts up against the frame so just run the wire over the frame where the two holes are for accessing the rear shock.

Kris

User avatar
Hadies
Site Supporter
Site Supporter
Reactions:
Posts: 1161
Joined: Tue Mar 16, 2010 1:20 am
Bike owned: NSR125, NC30, Daytona 675
Location: Washington, Tyne and Wear
Re: vfr 400 nc30 rear banjo brake line bolt

Post by Hadies » Thu Jul 29, 2010 11:32 pm

I havent been running a rear brake light switch for the past few weeks. I normally only use my rear brake in conjunction with front so haven't been too desperate to fit my banjo switch

User avatar
porndoguk
Site Supporter
Site Supporter
Reactions:
Posts: 6406
Joined: Wed Jun 16, 2010 11:17 pm
Bike owned: NC30
Location: Middle England
Contact:
Re: vfr 400 nc30 rear banjo brake line bolt

Post by porndoguk » Thu Jul 29, 2010 11:36 pm

anyone gots pics? especially with standard rear set to see how it fits?


Post Reply