flat spot / jetting
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Moderators
- Reactions:
- Posts: 9358
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: flat spot / jetting
Yes no snorkle will buggar it upChowderV4 wrote:just noticed something said about the standard air box with standard snorkle.
my airbox is missing the snorkle, will this cause any set up issues or is it not a big deal.
sorry for stealing the thread a lil
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
- Cammo
- Site Supporter
- Reactions:
- Posts: 5524
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: flat spot / jetting
They're fuel overflow pipes, you don't need them.indiaguy wrote: Hitting the dyno on Tuesday,just wondering about the 2 pipes that I see in your photo,they come from each bank of carbs.
On my carbs,they just vent into fresh air,yours are connected into something?
They are the black pipes running by the left rear carb top.
"It's just a ride" Bill Hicks
- Indiana Jones
- Site Supporter
- Reactions:
- Posts: 252
- Joined: Mon Jul 20, 2009 8:48 am
- Bike owned: XT600Z,'10 TE250 ,XS650 chop
- Location: Faugheen
- Contact:
Re: flat spot / jetting
Thanks, it looks neater than my setup.
That wouldn't be hard.
Fingers crossed for my dyno session on Tuesday.
That wouldn't be hard.
Fingers crossed for my dyno session on Tuesday.
-
- Settled in member
- Reactions:
- Posts: 42
- Joined: Wed Feb 17, 2010 11:05 am
- Bike owned: 3
- Location: uk lancashire
Re: flat spot / jetting
well guys, bike now rebuilt with new carb, jets, needles and modified air filter.
had a quick run up the road as the sun was setting last night and all is good.
bike pulled all the way to the red without a hickup, sounds a little lumpy at tick over but she wont be sat there for long .
so the set up at the moment:
air tray
standard air box / less restrictive filter foam (cheers rick oliver)
set of needles (rick oliver)
120 jets all round (rick oliver)
2 1/4 turns out on screw
my next question
the carbs came fitted with 120 jets on the front cylinders and 122.5 on the rears, any reason why?
had a quick run up the road as the sun was setting last night and all is good.
bike pulled all the way to the red without a hickup, sounds a little lumpy at tick over but she wont be sat there for long .
so the set up at the moment:
air tray
standard air box / less restrictive filter foam (cheers rick oliver)
set of needles (rick oliver)
120 jets all round (rick oliver)
2 1/4 turns out on screw
my next question
the carbs came fitted with 120 jets on the front cylinders and 122.5 on the rears, any reason why?