How to Video: Replace Clutch Plates (NC30)
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 162
- Joined: Sat May 03, 2008 6:42 pm
- Bike owned: UK NC30 17" Rear.
Re: How to Video: Replace Clutch Plates (NC30)
I watched this video and it is fantastic I filled down the notches in the basket very lightly fitted honda friction plates and new steels along with a new clutch nut job done. when all fitted back the bike make sure the clutch releases evenly and not sticking before you box it all back up, I had faulty warped clutch springs that caused a judder I figured it out in the end.
NB TIP - If you are very handy with a angle grinder when you get your new clutch nut get a removal socket made out of a suitable old socket I did - just the job cos you will need one.
NB TIP - If you are very handy with a angle grinder when you get your new clutch nut get a removal socket made out of a suitable old socket I did - just the job cos you will need one.