Wheel bearing removal CB400 S/S
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
BillyBarcelona
- Settled in member
- Reactions:
- Posts: 7
- Joined: Sun Mar 10, 2024 3:21 pm
Wheel bearing removal CB400 S/S
Hi folks, I may have posted this in the wrong place earlier, I'm a newbie.
Got a renovation going on with a 1992 CB400 Super Sport and I'm stripping at the moment.
Going to have the wheels powder coated and I wondered how to get the rear bearings out of the wheel before, it seems to have a spacer between inner and outer so struggling, any help would be gratefully received.
Cheers, Andy
Got a renovation going on with a 1992 CB400 Super Sport and I'm stripping at the moment.
Going to have the wheels powder coated and I wondered how to get the rear bearings out of the wheel before, it seems to have a spacer between inner and outer so struggling, any help would be gratefully received.
Cheers, Andy
-
magg
- Senior Member
- Reactions:
- Posts: 1910
- Joined: Mon Sep 20, 2010 11:55 pm
- Bike owned: VFR400
- Location: Blue Mountain NSW Australia
Re: Wheel bearing removal CB400 S/S
Move the spacer off centre so that the inner side of one bearing is exposed and then press/drive out the bearing.