NC 30 dry clutch and several other trick bits

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
mathatch
Settled in member
Reactions:
Posts: 39
Joined: Mon Jun 16, 2014 11:32 pm
Re: NC 30 dry clutch and several other trick bits

Post by mathatch » Sun Apr 15, 2018 9:42 pm

Sorry i have been so slack in updating i have had other priorities. I havent made much progress basically stripped the bike down lightened everything and replaced bolts with aluminum and titanium. So i made a new fork for the bottom of an R6 13S shock to lengthen it. The main thing i have been waiting for is a set of cams i sent off to be re-ground. I have also made an adjustable rear linkage but i havent got any photos of that yet.[IMG]//uploads.tapatalk-cdn.com/201804 ... fb5e2e.jpg[/IMG]ImageImageImage

Sent from my LG-H850 using Tapatalk


User avatar
mruehl34
Site Supporter
Site Supporter
Reactions:
Posts: 665
Joined: Wed Apr 30, 2008 8:06 pm
Location: Germany
Contact:
Re: NC 30 dry clutch and several other trick bits

Post by mruehl34 » Mon Apr 16, 2018 8:52 pm

Where is the dry clutch???

Michael

mathatch
Settled in member
Reactions:
Posts: 39
Joined: Mon Jun 16, 2014 11:32 pm
Re: NC 30 dry clutch and several other trick bits

Post by mathatch » Wed Apr 18, 2018 10:06 pm

mruehl34 wrote:Where is the dry clutch???

Michael
The clutch has been put off until i get the bike up and running and on track. I know it is the piece most people are interested in but i need a running driving bike before i worry about it and besides i got too carried away lightening the rolling chasis. But that is together now and should have the engine back together start of next mounth so after that should be time to blow the dust off the clutch parts. (Maybe i should change the thread name to half arsed attemp at dry clutch) hahahaha.

Sent from my LG-H850 using Tapatalk


saltysealion
Settled in member
Reactions:
Posts: 46
Joined: Tue Oct 27, 2015 6:45 am
Re: NC 30 dry clutch and several other trick bits

Post by saltysealion » Mon Apr 23, 2018 7:28 am

I see a cap at the end of the rod. Are they supposed to be oil tight?

I am assuming oil gets pumped into them, and exit via the drain holes.


Post Reply

Return to “V4 - Workshop”