NC30 UK and Japanese spec and differences.

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
User avatar
3024E
Site Supporter
Site Supporter
Reactions:
Posts: 68
Joined: Fri Sep 10, 2010 4:09 pm
Bike owned: UK NC30
Location: Bolton Lancashire
Contact:
Re: NC30 UK and Japanese spec and differences.

Post by 3024E » Sat Nov 13, 2010 7:59 pm

Both of my NC30's are +2

ptyboy74
Settled in member
Reactions:
Posts: 7
Joined: Tue Nov 23, 2010 9:56 pm
Bike owned: NC30 RC30 BMW/GS
Location: N.Ireland
Re: NC30 UK and Japanese spec and differences.

Post by ptyboy74 » Tue Nov 23, 2010 10:07 pm

The reason for the cooler & uprated oil pump were simple.....

What was the NC30 doing in the UK in the early 90s with a price tag exceeding the mighty flagship CBR1000F.....? Racing pure and simple.

The NCs place in the UK market at that time was in the supersport class at the TT and the cooler combined with the uprated pump helped give it an easier time while flying over the mountain circuit. :whistle:

Anyone else just bought an RS250 and stayed clear of the expensive 4stroke road bike :geek: (until the market made the Grey route profitable! :grin: )

hunter
Site Supporter
Site Supporter
Reactions:
Posts: 2141
Joined: Thu Nov 20, 2008 1:09 pm
Re: NC30 UK and Japanese spec and differences.

Post by hunter » Sat Oct 22, 2011 12:54 am

I'v been reading through this thread again,
And noticed that the frame No on my bike was, 2000046.So i take it that my bike was the 46th bike off the line
And dave arsey30 Frame No was, 200032?

My bike was registered in march 1990.
Daves bike was registered june 1990. So there were approx 280 registered in three month's of that year alone.

User avatar
3024E
Site Supporter
Site Supporter
Reactions:
Posts: 68
Joined: Fri Sep 10, 2010 4:09 pm
Bike owned: UK NC30
Location: Bolton Lancashire
Contact:
Re: NC30 UK and Japanese spec and differences.

Post by 3024E » Sat Oct 22, 2011 5:49 pm

No not really, i had a uk bike with chassis number less than 50, and it was registered June 91

Neosophist
Moderators
Moderators
Reactions:
Posts: 9358
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: NC30 UK and Japanese spec and differences.

Post by Neosophist » Sat Nov 26, 2011 11:29 am

ptyboy74 wrote:The reason for the cooler & uprated oil pump were simple.....

What was the NC30 doing in the UK in the early 90s with a price tag exceeding the mighty flagship CBR1000F.....? Racing pure and simple.

The NCs place in the UK market at that time was in the supersport class at the TT and the cooler combined with the uprated pump helped give it an easier time while flying over the mountain circuit. :whistle:

Anyone else just bought an RS250 and stayed clear of the expensive 4stroke road bike :geek: (until the market made the Grey route profitable! :grin: )
The oil-pump wasn't uprated though, it was just the old NC24 oil pump, (the older NC13E engine based model that already had an oil-cooler as standard. Although the 24 is inferoir in components compraed to the later 30 at the time it was the first road going VFR with the single sided swining arm, a direct descendant of the RVF400 HRC race bike, which is probably why it had an oil cooler, as they don't get very warm.)

I thought it may be a marketing ploy for the UK/Euro market.

The ZXR400 was also an official UK model at the time and competitor which did have an oil cooler, perhaps Honda didn't want to give Kawasaki or there fans a marketing spot for there bike?

I think all of the other changes, subframe, exhaust, lights and mirriors and bodywork shapes were just for the extra few PS on the marketing sheet and UK lighting regs.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...

The Big Taveri
Settled in member
Reactions:
Posts: 7
Joined: Fri Dec 09, 2011 10:22 am
Bike owned: NSR250MC28 CBR250MC19 VFR400R
Location: Carrara Toscana ITALIA
Contact:
Re: NC30 UK and Japanese spec and differences.

Post by The Big Taveri » Wed Jan 11, 2012 10:46 pm

Hello, my NC30 frame is :nc302000160
I have buy in Italy 1992 see picture below :

Image

:whistle:

manicmatelot
Settled in member
Reactions:
Posts: 2
Joined: Sun Mar 11, 2012 5:17 pm
Re: NC30 UK and Japanese spec and differences.

Post by manicmatelot » Thu Mar 15, 2012 12:46 pm

Hi all, i'm new on here but i'm looking aound at the moment for either a NC30 or 35. It must be a UK official bike and i'm quite happy about the NC30 but can anyone point me in the right direction regarding the NC35? Were they all grey imports from Japan or did they also get officially imported by Honda UK..? If so how can i tell as it's too easy to swap the clocks from a kph to a mph one.. Cheers

User avatar
CRM
Admin NWAA
Admin NWAA
Reactions:
Posts: 6507
Joined: Sat Apr 05, 2008 2:06 pm
Location: NorthWest
Contact:
Re: NC30 UK and Japanese spec and differences.

Post by CRM » Thu Mar 15, 2012 12:52 pm

hi, start a post for this alone please.
all 35's were imports
Insert Signature Here

Claytonbojo
Settled in member
Reactions:
Posts: 110
Joined: Fri Jul 16, 2010 5:41 pm
Bike owned: VFR NC30 NSR125, Pit bike 200C
Location: Worth Sussex
Re: NC30 UK and Japanese spec and differences.

Post by Claytonbojo » Tue Mar 27, 2012 7:45 am

So dose this obviously mean that uk Bike parts won't for jap spec bikes? I think I have already run in to a problem cores my right Handel bar feels diffrent to my left! Also wot parts are more reliable uk parts or jap imports?

User avatar
CRM
Admin NWAA
Admin NWAA
Reactions:
Posts: 6507
Joined: Sat Apr 05, 2008 2:06 pm
Location: NorthWest
Contact:
Re: NC30 UK and Japanese spec and differences.

Post by CRM » Tue Mar 27, 2012 7:47 am

no bits like that are the same.
start a new thread if you will please
Insert Signature Here


Post Reply