Page 1 of 1
WTB NC35 HT leads and caps
Posted: Thu Oct 19, 2023 2:00 pm
by RVFmal
Need to replace an HT lead and cap for the NC35.
So far have not found anything on the OEM part number.
Any idea where I can source an aftermarket unit or which manufacturer of leads still currently produce to the NC35 spec?
Re: WTB NC35 HT leads and caps
Posted: Fri Oct 20, 2023 12:37 pm
by CMSMJ1
Howdo Mal
Welcome.
You'll be needing one of these chaps to deal with -
https://www.rickoliver.co.uk/stocklist.pdf - Rick Oliver
Graeme France Racing
07522 166832 - Andy
gfracingtw@live.co.uk
Re: WTB NC35 HT leads and caps
Posted: Fri Oct 20, 2023 7:08 pm
by MadMotoUK
RVFmal wrote: ↑Thu Oct 19, 2023 2:00 pm
Need to replace an HT lead and cap for the NC35.
So far have not found anything on the OEM part number.
Any idea where I can source an aftermarket unit or which manufacturer of leads still currently produce to the NC35 spec?
Same part on the NC30 and NC29.
Re: WTB NC35 HT leads and caps
Posted: Tue Nov 07, 2023 10:51 am
by RVFmal
MadMotoUK wrote: ↑Fri Oct 20, 2023 7:08 pm
RVFmal wrote: ↑Thu Oct 19, 2023 2:00 pm
Need to replace an HT lead and cap for the NC35.
So far have not found anything on the OEM part number.
Any idea where I can source an aftermarket unit or which manufacturer of leads still currently produce to the NC35 spec?
Same part on the NC30 and NC29.
Found a set of leads and caps off of a NC24. Are these compatible or should I stick to looking for units off an NC30 (as the NC35 units are nigh on impossible to find locally and cannot find the apparent compatible SD05FM caps from NGK at any of our local parts stores - NGK themselves are less than useless here too).
Re: WTB NC35 HT leads and caps
Posted: Tue Nov 07, 2023 10:53 am
by RVFmal
MadMotoUK wrote: ↑Fri Oct 20, 2023 7:08 pm
RVFmal wrote: ↑Thu Oct 19, 2023 2:00 pm
Need to replace an HT lead and cap for the NC35.
So far have not found anything on the OEM part number.
Any idea where I can source an aftermarket unit or which manufacturer of leads still currently produce to the NC35 spec?
Same part on the NC30 and NC29.
Found a set of leads and caps off of a NC24. Are these compatible or should I stick to looking for units off an NC30 (as the NC35 units are nigh on impossible to find locally and cannot find the apparent compatible SD05FM caps from NGK at any of our local parts stores - NGK themselves are less than useless here too).
Re: WTB NC35 HT leads and caps
Posted: Mon Nov 13, 2023 1:26 pm
by CMSMJ1
RVFmal wrote: ↑Tue Nov 07, 2023 10:53 am
MadMotoUK wrote: ↑Fri Oct 20, 2023 7:08 pm
RVFmal wrote: ↑Thu Oct 19, 2023 2:00 pm
Need to replace an HT lead and cap for the NC35.
So far have not found anything on the OEM part number.
Any idea where I can source an aftermarket unit or which manufacturer of leads still currently produce to the NC35 spec?
Same part on the NC30 and NC29.
Found a set of leads and caps off of a NC24. Are these compatible or should I stick to looking for units off an NC30 (as the NC35 units are nigh on impossible to find locally and cannot find the apparent compatible SD05FM caps from NGK at any of our local parts stores - NGK themselves are less than useless here too).
Bigger plugs on an NC24 so not sure they would work?
Is it a spare you need, or new? Mighthave one in my container that I might be visiting this weekend - if I find one, I'll let you know
Re: WTB NC35 HT leads and caps
Posted: Mon Nov 13, 2023 2:41 pm
by RVFmal
CMSMJ1 wrote: ↑Mon Nov 13, 2023 1:26 pm
Bigger plugs on an NC24 so not sure they would work?
Is it a spare you need, or new? Mighthave one in my container that I might be visiting this weekend - if I find one, I'll let you know
I had a chat to Rick Oliver and he advised me that the plug caps could be repaired, which is a win (even sent me a how-to). So got some 7mm HT lead and will perform a repair this evening and give it a whirl.
As an side, I did check whether the NC24 caps would fit and as you rightly stated, they do not
Re: WTB NC35 HT leads and caps
Posted: Mon Nov 13, 2023 9:30 pm
by CMSMJ1
RVFmal wrote: ↑Mon Nov 13, 2023 2:41 pm
CMSMJ1 wrote: ↑Mon Nov 13, 2023 1:26 pm
Bigger plugs on an NC24 so not sure they would work?
Is it a spare you need, or new? Mighthave one in my container that I might be visiting this weekend - if I find one, I'll let you know
I had a chat to Rick Oliver and he advised me that the plug caps could be repaired, which is a win (even sent me a how-to). So got some 7mm HT lead and will perform a repair this evening and give it a whirl.
As an side, I did check whether the NC24 caps would fit and as you rightly stated, they do not
Awesome - Rick is a good man indeed.
Re: WTB NC35 HT leads and caps
Posted: Tue Nov 14, 2023 4:09 am
by RVFmal
CMSMJ1 wrote: ↑Mon Nov 13, 2023 9:30 pm
Awesome - Rick is a good man indeed.
He most certainly is. Thank you for recommending him in your revious reply. A very helpful gentleman and a veritable treasure trove of extremely helpful information.