help for nc30 forks alternative.
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 4
- Joined: Thu Jun 28, 2018 10:02 am
help for nc30 forks alternative.
Hi Guys,
Thought I was being clever using vfr750 forks for nc30 pre 96 project but they are too long.
Struggling to find set of nc30 forks here in NZ.
cbr400 forks are available and they are 41mm diameter same as vfr but are they a similar length?
Any help appreciated.
Thought I was being clever using vfr750 forks for nc30 pre 96 project but they are too long.
Struggling to find set of nc30 forks here in NZ.
cbr400 forks are available and they are 41mm diameter same as vfr but are they a similar length?
Any help appreciated.
- CMSMJ1
- Moderators
- Reactions:
- Posts: 9806
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: help for nc30 forks alternative.
Welcome :)
I've seen CBR600 forks used too - still a bit long but doable and have shit sliding caliper mounts
What's up with your current forks?
I've seen CBR600 forks used too - still a bit long but doable and have shit sliding caliper mounts
What's up with your current forks?
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
- Yakama
- Site Supporter
- Reactions:
- Posts: 2676
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: help for nc30 forks alternative.
Cbr400 nc23 are way too long 741mm compared to nc30 690, cbr400 nc29 is closer at 710mm but still longer
-
- Settled in member
- Reactions:
- Posts: 4
- Joined: Thu Jun 28, 2018 10:02 am
Re: help for nc30 forks alternative.
Hi guys
Didn’t have any forks when I started with nc30 frame hence the question.
Nc29 looks like the answer can drop through yokes for right length,thanks for the help.
Didn’t have any forks when I started with nc30 frame hence the question.
Nc29 looks like the answer can drop through yokes for right length,thanks for the help.
-
- Moderators
- Reactions:
- Posts: 9358
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: help for nc30 forks alternative.
41 Honda CR-250R (81)
41 Honda XR-250L (91-96)
41 Honda XR-250R (86-89)
41 Honda XR-250R (90-04)
41 Honda XR-350R (83)
41 Honda XR-350R (84)
41 Honda XR-350R (85)
41 Honda CB-400F (89-90)
41 Honda CR-450R (81)
41 Honda CBR-600F2 (91-94)
41 Honda CBR-600SE (98 )
41 Honda XL-600V "Transalp" (89-90)
41 Honda NT-650 "Hawk GT" (89-91)
41 Honda NX-650 (88-89)
41 Honda CB-750 "Nighthawk" (91-03)
41 Honda RVF-720R (94)
41 Honda VF-750C "Magna" (94-03)
41 Honda VF-750C2 "Magna Deluxe" (97-00)
41 Honda VFR-750F (90-97)
41 Honda VT-750CDA/B/C/D "Shadow American Classic Ed. Deluxe"
(03)
41 Honda VT-750DC (01-03)
41 Honda PC-800 (89-90, 94-98 )
41 Honda CBR-1000F "Hurricane" (87-91, 93-96)
41 Honda VF-1000F "Interceptor" (84)
41 Honda VTR-1000F "Super Hawk" (98-04)
41 Honda ST-1100 (91-02)
41 Honda VF-1100C "V65 Magna" (83-86)
41 Honda VT-1100C "Shadow 1100" (85-90, 92-96)
41 Honda VT-1100C2 (95-99)/ C2-2 (97) "Shadow 1100 American
Classic Ed."
41 Honda VT-1100C3 "Shadow Aero" (98-02)
41 Honda VT-1100D2 "Shadow 1100 American Classic Ed." (99)
41 Honda VT-1100T "Shadow 1100 American Classic Ed. Tourer"
(98-00)
41 Honda GL-1200 "Goldwing" (84)
41 Honda GL-1200 I "Interstate" (84-87)
41 Honda GL-1200L "Ltd" (85)
41 Honda VTX-1300C (04)
41 Honda GL-1500 "Goldwing" (88-90)
41 Honda GL-1500I "Interstate" (91-96)
41 Kawasaki KX-125 B1 (82)
41 Kawasaki KX-125 H1 (90)
41 Kawasaki KDX-200E5-E6 (93-94)
41 Kawasaki KX-250H1 (90)
41 Kawasaki KXT-250B1 (86)
41 Kawasaki EN-500C1-C8 "Vulcan 500 Ltd" (96-03)
41 Kawasaki EN-500C9 "Vulcan 500 Ltd" (04)
41 Kawasaki KX-500 E2 (90)
41 Kawasaki ZX-600D1-D4 "Ninja (ZX-6)" (90-93)
41 Kawasaki ZX-600E1-E12 "Ninja (ZX-6)" (93-04)
41 Kawasaki ZX-600F1-F3 "Ninja (ZX-6R)" (95-97)
41 Kawasaki ZR-750C1-C3 (91-93)
41 Kawasaki ZR-750F2 (00)
41 Kawasaki ZX-750K1/K2 "Ninja (ZX-7R)" (91-92)
41 Kawasaki ZX-750L2-L3 "Ninja (ZX-7)" (94-95)
41 Kawasaki VN-800 A1-A10 "Vulcan" (95-04)
41 Kawasaki VN-800 B1-B9 "Vulcan Classic" (96-04)
41 Kawasaki VN-800 C1-C2 "Vulcan Drifter" (99-00)
41 Kawasaki ZX-900B1-B4 "Ninja (ZX-9R)" (94-97)
41 Kawasaki ZG-1000A1-A13 "Concours" (86-98 )
41 Kawasaki ZG-1000A14-A19 (99-04)
41 Kawasaki ZR-1000A1/A2 (03-04)
41 Kawasaki ZX-1000B1-B3 "Ninja (ZX-10)" (88-90)
41 Kawasaki ZX-1100E1-E3 "GPz 1100" (95-97)
41 Kawasaki ZG-1200A1/B1-B17 "Voyager XII" (86-03)
41 Kawasaki KZ-1300A1-A4 (79-82)
41 Kawasaki ZN-1300A1-A6 "Voyager" (83-88 )
41 Kawasaki VN-1500A1-A5 "Vulcan 88/Vulcan 1500"(87-91),
VN-1500 B1-B4"Vulcan 88 SE" (87-90)
41 Kawasaki VN-1500A6-A13 (92-99)
41 Kawasaki VN-1500 D1-D2 "Vulcan 1500 Classic" (96-97)
41 Kawasaki VN-1500 E1-E7 "Vulcan 1500 Classic" (98-04)
41 Kawasaki VN-1500 G1/G1A/G2 "Vulcan 1500 Nomad" (99-00)
41 Kawasaki VN-1500J1-J2 "Vulcan 1500 Drifter" (99-00)
41 Kawasaki VN-1500 L1-L5 "Vulcan 1500 Nomad Fi" (00-04)
41 Kawasaki VN-1500N1-N3 "Vulcan 1500 Classic Fi" (00-02)
41 Kawasaki VN-1500R1-R4 "Vulcan 1500 Drifter" (01-04)
41 Suzuki RM-125 L (90)
41 Suzuki RM-125 L (90)
41 Suzuki RM-250 K/L (89-90)
41 Suzuki RM-250 K/L (89-90)
41 Suzuki RMX-250 K/L (89-90)
41 Suzuki RMX-250 K/L (89-90)
41 Suzuki AN-400 K3/K4 (03-04)
41 Suzuki GSF-400 M/N/P "Bandit" (91-93)
41 Suzuki GSF-600 ST/SV/SW "Bandit" (96-98 )
41 Suzuki GSF-600 ST/SV/SW "Bandit" (96-98 )
41 Suzuki GSF-600 SX//SY/SK1/SK2/SK3 "Bandit" (99-03)
41 Suzuki GSX-600 FJ "Katana" (88 )
41 Suzuki GSX-600 FK/FL/FM "Kata
found this on a google serach, plenty to go on, might need brakes / wheels and stuff if you get creative.. unfortuantly no measurements but can always ask people if you find something local... beware of spring rates in non vfr forks (somethign similar weighted should be a good start) as well as any calipers / weels / axles / discs etc.
41 Honda XR-250L (91-96)
41 Honda XR-250R (86-89)
41 Honda XR-250R (90-04)
41 Honda XR-350R (83)
41 Honda XR-350R (84)
41 Honda XR-350R (85)
41 Honda CB-400F (89-90)
41 Honda CR-450R (81)
41 Honda CBR-600F2 (91-94)
41 Honda CBR-600SE (98 )
41 Honda XL-600V "Transalp" (89-90)
41 Honda NT-650 "Hawk GT" (89-91)
41 Honda NX-650 (88-89)
41 Honda CB-750 "Nighthawk" (91-03)
41 Honda RVF-720R (94)
41 Honda VF-750C "Magna" (94-03)
41 Honda VF-750C2 "Magna Deluxe" (97-00)
41 Honda VFR-750F (90-97)
41 Honda VT-750CDA/B/C/D "Shadow American Classic Ed. Deluxe"
(03)
41 Honda VT-750DC (01-03)
41 Honda PC-800 (89-90, 94-98 )
41 Honda CBR-1000F "Hurricane" (87-91, 93-96)
41 Honda VF-1000F "Interceptor" (84)
41 Honda VTR-1000F "Super Hawk" (98-04)
41 Honda ST-1100 (91-02)
41 Honda VF-1100C "V65 Magna" (83-86)
41 Honda VT-1100C "Shadow 1100" (85-90, 92-96)
41 Honda VT-1100C2 (95-99)/ C2-2 (97) "Shadow 1100 American
Classic Ed."
41 Honda VT-1100C3 "Shadow Aero" (98-02)
41 Honda VT-1100D2 "Shadow 1100 American Classic Ed." (99)
41 Honda VT-1100T "Shadow 1100 American Classic Ed. Tourer"
(98-00)
41 Honda GL-1200 "Goldwing" (84)
41 Honda GL-1200 I "Interstate" (84-87)
41 Honda GL-1200L "Ltd" (85)
41 Honda VTX-1300C (04)
41 Honda GL-1500 "Goldwing" (88-90)
41 Honda GL-1500I "Interstate" (91-96)
41 Kawasaki KX-125 B1 (82)
41 Kawasaki KX-125 H1 (90)
41 Kawasaki KDX-200E5-E6 (93-94)
41 Kawasaki KX-250H1 (90)
41 Kawasaki KXT-250B1 (86)
41 Kawasaki EN-500C1-C8 "Vulcan 500 Ltd" (96-03)
41 Kawasaki EN-500C9 "Vulcan 500 Ltd" (04)
41 Kawasaki KX-500 E2 (90)
41 Kawasaki ZX-600D1-D4 "Ninja (ZX-6)" (90-93)
41 Kawasaki ZX-600E1-E12 "Ninja (ZX-6)" (93-04)
41 Kawasaki ZX-600F1-F3 "Ninja (ZX-6R)" (95-97)
41 Kawasaki ZR-750C1-C3 (91-93)
41 Kawasaki ZR-750F2 (00)
41 Kawasaki ZX-750K1/K2 "Ninja (ZX-7R)" (91-92)
41 Kawasaki ZX-750L2-L3 "Ninja (ZX-7)" (94-95)
41 Kawasaki VN-800 A1-A10 "Vulcan" (95-04)
41 Kawasaki VN-800 B1-B9 "Vulcan Classic" (96-04)
41 Kawasaki VN-800 C1-C2 "Vulcan Drifter" (99-00)
41 Kawasaki ZX-900B1-B4 "Ninja (ZX-9R)" (94-97)
41 Kawasaki ZG-1000A1-A13 "Concours" (86-98 )
41 Kawasaki ZG-1000A14-A19 (99-04)
41 Kawasaki ZR-1000A1/A2 (03-04)
41 Kawasaki ZX-1000B1-B3 "Ninja (ZX-10)" (88-90)
41 Kawasaki ZX-1100E1-E3 "GPz 1100" (95-97)
41 Kawasaki ZG-1200A1/B1-B17 "Voyager XII" (86-03)
41 Kawasaki KZ-1300A1-A4 (79-82)
41 Kawasaki ZN-1300A1-A6 "Voyager" (83-88 )
41 Kawasaki VN-1500A1-A5 "Vulcan 88/Vulcan 1500"(87-91),
VN-1500 B1-B4"Vulcan 88 SE" (87-90)
41 Kawasaki VN-1500A6-A13 (92-99)
41 Kawasaki VN-1500 D1-D2 "Vulcan 1500 Classic" (96-97)
41 Kawasaki VN-1500 E1-E7 "Vulcan 1500 Classic" (98-04)
41 Kawasaki VN-1500 G1/G1A/G2 "Vulcan 1500 Nomad" (99-00)
41 Kawasaki VN-1500J1-J2 "Vulcan 1500 Drifter" (99-00)
41 Kawasaki VN-1500 L1-L5 "Vulcan 1500 Nomad Fi" (00-04)
41 Kawasaki VN-1500N1-N3 "Vulcan 1500 Classic Fi" (00-02)
41 Kawasaki VN-1500R1-R4 "Vulcan 1500 Drifter" (01-04)
41 Suzuki RM-125 L (90)
41 Suzuki RM-125 L (90)
41 Suzuki RM-250 K/L (89-90)
41 Suzuki RM-250 K/L (89-90)
41 Suzuki RMX-250 K/L (89-90)
41 Suzuki RMX-250 K/L (89-90)
41 Suzuki AN-400 K3/K4 (03-04)
41 Suzuki GSF-400 M/N/P "Bandit" (91-93)
41 Suzuki GSF-600 ST/SV/SW "Bandit" (96-98 )
41 Suzuki GSF-600 ST/SV/SW "Bandit" (96-98 )
41 Suzuki GSF-600 SX//SY/SK1/SK2/SK3 "Bandit" (99-03)
41 Suzuki GSX-600 FJ "Katana" (88 )
41 Suzuki GSX-600 FK/FL/FM "Kata
found this on a google serach, plenty to go on, might need brakes / wheels and stuff if you get creative.. unfortuantly no measurements but can always ask people if you find something local... beware of spring rates in non vfr forks (somethign similar weighted should be a good start) as well as any calipers / weels / axles / discs etc.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
- RickOliver
- Site Supporter
- Reactions:
- Posts: 536
- Joined: Sun May 11, 2008 8:55 am
Re: help for nc30 forks alternative.
It`s not just the overall fork length that you need to consider - the length of the sliders comes into it as well. A lot of 41mm Showas have a longer slider which will clout the bottom yoke under braking if fitted to the NC30. Early Firestorm (VTR1000F) forks will work OK - there`s a lot of stanchion sticking through the top yoke but the slider length is right and they use decent 4-pot calipers (same as the NC35 units) and take the original NC30 wheel and discs - pm me direct if you want pictures - ricknc30@gmail.com
Rick
Rick