Competent mechanic needed

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Foxy400
Regular Member
Reactions:
Posts: 793
Joined: Mon Sep 02, 2013 7:31 pm
Bike owned: NC35 NC29 Bonneville CBR600F4i
Location: Cheshire
Competent mechanic needed

Post by Foxy400 » Mon Aug 14, 2017 8:55 am

I'm looking for a reliable and competent mechanic to do some work on my NC35. I'm in the Wilmslow area of Cheshire and have tried two local mechanics who have both shown they're not as skilled as they claimed to be. One of them replaced a missing spacer (ie. he lost it) inside the rear wheel hub of my Yamaha with a piece of garden hose and half a dozen cheap washers! The other one left bits out when rebuilding a pair of forks (he reckoned they weren't needed :o ) and put the new seals in at an angle so they leaked.
Basically I need some one to check over the gearbox. I can find 1, 2 and 3 without problem and neutral is easy but 4, 5 and 6 get progressively harder to engage :cry: There's no slipping or jumping out of gear. (I've posted about this before and checked the clutch as suggested but with no luck).
So does anyone know a mechanic in my area who's worked on these bikes and know's what they're doing? Bear in mind I can't really get they bike to them (I don't want to risk making it worse) so it would need picking up.
I did ask Rick Oliver but he couldn't help.
Cheers.

CRM, RO said you lived in my vicinity and may have some suggestions. I did email you but maybe it went astray.

icklepob
Settled in member
Reactions:
Posts: 90
Joined: Sat Mar 11, 2017 8:13 pm
Re: Competent mechanic needed

Post by icklepob » Mon Aug 14, 2017 1:36 pm

Pete Alton at OTC in widnes. Not too far, and looks after many top racers, including us.
He races sidecars at top level himself, and builds all his own motors. The cream of top flight racing trust him with their stuff, so can vouch for his work,his prices and his honesty.



Sent from my SM-G950F using Tapatalk

icklepob
Settled in member
Reactions:
Posts: 90
Joined: Sat Mar 11, 2017 8:13 pm
Re: Competent mechanic needed

Post by icklepob » Mon Aug 14, 2017 1:36 pm

https://www.facebook.com/OTC-Dyno-Centr ... 337137106/

Sent from my SM-G950F using Tapatalk

TURK122
Settled in member
Reactions:
Posts: 147
Joined: Mon Jun 15, 2015 2:00 pm
Location: Hull
Re: Competent mechanic needed

Post by TURK122 » Mon Aug 14, 2017 6:41 pm

I used to know Pete many years ago when I raced sidecars.
Top bloke.


Sent from my SM-N910F using Tapatalk

Foxy400
Regular Member
Reactions:
Posts: 793
Joined: Mon Sep 02, 2013 7:31 pm
Bike owned: NC35 NC29 Bonneville CBR600F4i
Location: Cheshire
Re: Competent mechanic needed

Post by Foxy400 » Mon Aug 14, 2017 8:42 pm

Thanks for the recommendation. Sounds just what I need. Email on it's way to Pete.

icklepob
Settled in member
Reactions:
Posts: 90
Joined: Sat Mar 11, 2017 8:13 pm
Re: Competent mechanic needed

Post by icklepob » Mon Aug 14, 2017 9:33 pm

If you don't hear via email, a phone call may be better.
Pete is often in the isle of man at weekends, and in widnes during week.



Sent from my SM-G950F using Tapatalk

Foxy400
Regular Member
Reactions:
Posts: 793
Joined: Mon Sep 02, 2013 7:31 pm
Bike owned: NC35 NC29 Bonneville CBR600F4i
Location: Cheshire
Re: Competent mechanic needed

Post by Foxy400 » Tue Aug 15, 2017 7:55 am

Got a reply this morning! Phoning him later.

FluxCo
Settled in member
Reactions:
Posts: 55
Joined: Fri Oct 21, 2016 8:22 pm
Re: Competent mechanic needed

Post by FluxCo » Wed Sep 13, 2017 10:43 pm

Any recommendations for the Berkshire area?


Post Reply