NC30 UK spec carbs

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
NC35Race
Settled in member
Reactions:
Posts: 17
Joined: Sun Feb 17, 2013 6:10 pm
Location: Netherlands
Contact:
NC30 UK spec carbs

Post by NC35Race » Wed Jun 21, 2017 2:42 pm

Hello.

I have here a NC 30 UK model.

It has different emulsion tubes (needle holders) as the Jap. version. Also different A and B needles.
Can anybody tell me what belongs in the front ( 2 & 4) and what parts in the rear (1 & 3)?

2 emulsion tubes do have a total of 10 holes, the other 2 do have a total of 8 holes.

The needles are: J1GA and J1GB.

I hope somebody can give me the answer.

Best Regards Roel.

Here my V4 hobby site. www.400v4service.nl

st22041967
Settled in member
Reactions:
Posts: 72
Joined: Tue Jan 05, 2016 12:23 pm
Bike owned: NC30 Grey Import
Re: NC30 UK spec carbs

Post by st22041967 » Fri Jun 23, 2017 9:20 am

I posted some specs for NC30 carbs here

viewtopic.php?f=24&t=53569#p381279

NC35Race
Settled in member
Reactions:
Posts: 17
Joined: Sun Feb 17, 2013 6:10 pm
Location: Netherlands
Contact:
Re: NC30 UK spec carbs

Post by NC35Race » Fri Jun 23, 2017 3:19 pm

st22041967 wrote:I posted some specs for NC30 carbs here

viewtopic.php?f=24&t=53569#p381279

Thanks, but my bike is a official UK bike.
So a lot in the carbs is different.



My channel:

https://www.youtube.com/channel/UCZ3lhm ... _as=public

st22041967
Settled in member
Reactions:
Posts: 72
Joined: Tue Jan 05, 2016 12:23 pm
Bike owned: NC30 Grey Import
Re: NC30 UK spec carbs

Post by st22041967 » Fri Jun 23, 2017 8:37 pm

I'm pretty.ty sure it's just a jet difference, the carbs are the same. I'm going to wait with baited breath to find out.........

As far as I've heard the only difference between Jap NC30 and U.K. Are the rads/oil pump and jets.

Edit
After a bit of searching Fowlers micro fiche there does seem to be a difference in the tube/jet part numbers but alas the are discontinued so sorry I'm not any help here. Rick'O seems to know most things that are worth knowing about NC30's.

Fowlers
UK
https://www.fowlersparts.co.uk/parts/50 ... nent-parts
Japan
https://www.fowlersparts.co.uk/parts/50 ... nent-parts

Neosophist
Moderators
Moderators
Reactions:
Posts: 9358
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: NC30 UK spec carbs

Post by Neosophist » Sat Jun 24, 2017 4:37 pm

Carbs should have metal sliders too, some of this info is in the old uk nc30 thread in the general section.

UK bike has different exhaust part number too and perhaps different cams, i cant remember offhand without checking parts books i dont have here.

Been a while since I messed with any uk carbs but I think the stock jets should be 120 front and 122 rear.

the 5 hole tubes (10) go in the back, the 4 hole (8) go in the front.

Front needles are B, Rear needles are A.

Hope that helps
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...

NC35Race
Settled in member
Reactions:
Posts: 17
Joined: Sun Feb 17, 2013 6:10 pm
Location: Netherlands
Contact:
Re: NC30 UK spec carbs

Post by NC35Race » Sat Jun 24, 2017 10:51 pm

Neosophist wrote:Carbs should have metal sliders too, some of this info is in the old uk nc30 thread in the general section.

UK bike has different exhaust part number too and perhaps different cams, i cant remember offhand without checking parts books i dont have here.

Been a while since I messed with any uk carbs but I think the stock jets should be 120 front and 122 rear.

the 5 hole tubes (10) go in the back, the 4 hole (8) go in the front.

Front needles are B, Rear needles are A.

Hope that helps
Thanks.

I found needles and tubes on the wrong place.
But the 122 must in the front.!!

I cleaned the carbs ultrasoon in my large ultrasoonmachine.

Image
Image
Image
Image
Image
Image
Image

And my V4 mancave 8-) :
Image

This is my other project: http://400v4service.nl/rc30-rc45/

https://www.youtube.com/watch?v=DFwmV8a9HO0

https://www.youtube.com/watch?v=hyeeT8WongA

NC35Race
Settled in member
Reactions:
Posts: 17
Joined: Sun Feb 17, 2013 6:10 pm
Location: Netherlands
Contact:
Re: NC30 UK spec carbs

Post by NC35Race » Mon Jun 26, 2017 8:59 pm

Carbs are rebuild and bike today synchronized.

Image
Image

https://www.youtube.com/watch?v=hXsOAYJKNgo

TURK122
Settled in member
Reactions:
Posts: 147
Joined: Mon Jun 15, 2015 2:00 pm
Location: Hull
Re: NC30 UK spec carbs

Post by TURK122 » Mon Jun 26, 2017 9:31 pm

That's one he'll of a man cave.
Don't suppose you you be will to write a step by step guide to balancing the nc30 carbs would you?

Sent from my SM-N910F using Tapatalk

NC35Race
Settled in member
Reactions:
Posts: 17
Joined: Sun Feb 17, 2013 6:10 pm
Location: Netherlands
Contact:
Re: NC30 UK spec carbs

Post by NC35Race » Thu Jun 29, 2017 6:53 pm

TURK122 wrote:That's one he'll of a man cave.
Don't suppose you you be will to write a step by step guide to balancing the nc30 carbs would you?

Sent from my SM-N910F using Tapatalk
I will do that. I will take pictures the next NC30 balancing-job. Then later I will make a step by step guide.
Only problem is, I'm from the Netherlands, so my technical Englisch is not so good,but I will try.

This NC30 first type 1989 was a job a while ago. (I have 4 NC30). No. 1 2 and 5. And a NC30 Suzuka OKI endurance racer

https://www.youtube.com/watch?v=pgByZCRMaCA

Here you can see the whole project. Sorry,it is in Dutch. :oops:
http://www.motor-forum.nl/forum/list_me ... tje-1.html

Building the OKI racer: http://400v4service.nl/nc30-nc35/
and: http://www.motor-forum.nl/forum/list_me ... uka-1.html

TURK122
Settled in member
Reactions:
Posts: 147
Joined: Mon Jun 15, 2015 2:00 pm
Location: Hull
Re: NC30 UK spec carbs

Post by TURK122 » Thu Jun 29, 2017 7:32 pm

That oki build is fantastic mate.
I have 1 and 1/2 nc30's. I'm new to 4 strokes and love my nc30. Look forward to reading the balancing guide write up.
[img]//uploads.tapatalk-cdn.com/201706 ... 1affa2.jpg[/img]

Sent from my SM-N910F using Tapatalk


Post Reply