Hi, i have a cb400 SF NC31 96

Im looking to find a set of new HT wires to repla e d old ones i have. They still fine but have been on for god knows as i bought it 3 years ago.

Fount the ignition coils on wemoto.com but really expensive! Do i need to change the coils tooo? Is it realy worth it? And where can i get the Ht wires complete with pligs. Genuine parts preferred

Thanks for your time

Sent from my SM-T550 using Tapatalk

A mate replaced his HT leads with some generic HT cable from eBay, 30 mins later and the bike was running beautifully

I changed the plugs nd found some ust, even the sparks themselves had some rust so id rather have the stock coz they have covers preventing the wayer from entering. I use it as a daily so there will b times when il be in the rain.... though it doesnt rain much here

MIne has 1000RR pencil coils wired in series on the stock ignitor. Can literally point a hose into the plug hole and have the bike running cleanly. No more plug leads to worry about. I also used some non conductive grease on the ends where they sit on the plug as well as per the 1000RR manual.