NC30 headstock stand

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
User avatar
alexwitham
Site Supporter
Site Supporter
Reactions:
Posts: 2895
Joined: Wed May 20, 2009 10:04 pm
Bike owned: 675R, GSXR6, NC30
Location: Norwich
Re: NC30 headstock stand

Post by alexwitham » Wed Dec 26, 2012 9:01 pm

Looks like I'll be buying one of those then!

Baz
Settled in member
Reactions:
Posts: 135
Joined: Wed Sep 05, 2012 8:47 pm
Bike owned: VFR NC30 (91)
Location: South Yorkshire
Re: NC30 headstock stand

Post by Baz » Thu Dec 27, 2012 2:22 pm

I have one and it is solid. If you get one make sure you order the 27mm pin with it because I didnt realise I needed it until after the stand had arrived so had to order the pin afterwards. It cost £13 including postage. Still worth it though. Im doing my forks tomorrow so it will come in very handy!

Fitty
Settled in member
Reactions:
Posts: 25
Joined: Tue Oct 29, 2013 7:41 pm
Location: Melbourne, Australia
Re: NC30 headstock stand

Post by Fitty » Thu Nov 28, 2013 8:42 am

Apologies for dragging up an old thread, but I'm looking at buying one of these stands and from the pictures it looks like the top half of the stand rotates on pins securing it to the bottom half. If that's the case, what is there to prevent the stand from rotating freely while the bike is on it?

User avatar
bikemonkey
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 2213
Joined: Tue Dec 27, 2011 12:33 pm
Bike owned: 92 NC30, 90 VFR750
Location: Oxfordshire
Re: NC30 headstock stand

Post by bikemonkey » Thu Nov 28, 2013 7:28 pm

Good question sir.

I don't know, but I've been using it for a while and it's never buggered off from underneath my bike :peace:

User avatar
NGneer
Site Supporter
Site Supporter
Reactions:
Posts: 1349
Joined: Wed Jan 21, 2009 7:37 am
Bike owned: x3 NC30,Matchless G80s AJS16ms
Location: Köln
Re: NC30 headstock stand

Post by NGneer » Sat Oct 21, 2017 5:02 pm

Old thread revival.

Anyone remember the name of the company that did these Headstock stands?

I am going to need one for my next project and as these were a German company and I an currently in Germany it seemed to make sense to see if they are still selling them.

Anyone got any contact details.......and am I correct that I will need a 27mm pin for the NC30 head?

Thanks :peace:


Post Reply